Cleans old painted surfaces and leaves a thin film before recoating.
Allows paints to stick to any smooth non-porous surface.
Avoids sanding.
May be painted over anytime after 2 hours or up to 7 days later.
Easy to use.
Will not damage old coatings.
Reduces surface preparation time.
Ensure new finish is compatible with the old finish.
Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings .
Remove any loose and flaking old finish.
For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below.
Wipe up ESP before drying. Use clean clothes and change them regularly.
Do not contaminate new clean ESP with old used ESP.
Do not use ESP for dipping.
Application
Apply a liberal application of ESP.
Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove excess ESP.
Allow ESP to dry for 2 hours, before applying the finish.