OWATROL RA.85 Gr
Χρώμα αλουμινίου για όλες τις επιφάνειες
 Coverage: 18 m²/l |
 Application temperature: +5°C to +35°C |
 Drying: 4 to 6 h - Recoating time: 24 to 48 h |
PROPERTIES
Anti corrosive aluminium finish with intense high gloss look.
High reflecting film - light and heat
Excellent penetrating and adhesion properties due to the binding properties of OWATROL OIL - Does not peel or flake.
Rejuvinates rusted surfaces.
Ideal for aggresive climatic conditions. Withstands chemical attacks.
Easy application.
Protects against corrosion.
Very good film-forming qualities (adhesion, flexibility, even film).
High temperature resistance up to +175 °C.
WHERE TO USE
- Exterior: grates, fences, structural steelwork, roofing, cisterns, storage tanks, trailers, exhaust, pipes ...
- Interior: machinery, pumps, electrical, plumbing.
- Horizontal and vertical surfaces.
RECOMMENDATIONS BEFORE Application
- Shake or stir paint well before and during use.
- Surfaces must be clean, dry and free from oil, grease and other surface contaminants.
- On new metal (except aluminium), always apply an application of OWATROL OIL to avoid any possible reaction between the metal and aluminium paint.
- Cover everything you do not wish to paint, especially when applying by roller or spray.
- Do not dilute.
Application
- Apply a coat of OWATROL RA85. If two coats are required, allow 24 hours between coats.
- OWATROL RA85 is based on OWATROL OIL, which allows an even shiny film to form while maintaining high flexibility.
Recommendations after Application
- Return any unused product to it original container. Clean all tools and equipment.
- Rags soiled with RA85 should be allowed to dry flat or dipped in water before disposing of.
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84