Owatrol AP.60 Gr
Αντιδιαβρωτικό αστάρι
 Coverage: 16 to 20 m²/l |
 Application temperature: +5°C to +35°C |
 Drying: 6 to 8 h - Recoating time: 24 to 48 h |
PROPERTIES
OWATROL AP60 combines the unique qualities of OWATROL OIL with excellent corrosion protective paint.
OWATROL OIL unique wetting and penetrating properties, enable OWATROL AP60 to completely saturate residual rust, penetrating the deepest pores of the metal, stabilising the surface and driving out moisture and air to form a solid stable layer.
OWATROL AP60 provides a high resistant, solid first stable layer that effectively protect metals against corrosion.
OWATROL AP60 can be overcoated with any single pack paint (glycerophtalic, alkyd-urethanes, oil-based ,...).
specifications
- OWATROL AP60 is made from OWATROL OIL which has been combined with resins, drying oils and pigments selected for their corrosion properties and resistance to weathering.
Application
- Stir well before and during use.
- Apply OWATROL AP60 by brush, roller or spray (depending on the type and size of nozzle used, add between 5-20% of OWATROL OIL to OWATROL AP60 in order to bring it to the desired viscosity).
- Equipment Cleaning: White Spirit - If paint has been allowed to dry on the tools remove with paint stripper
Areas of application
- New Surfaces: Apply 1-2 coats OWATROL AP60.
- Lightly rusted Surfaces: Lightly wire brush the metal, followed by 1 to 2 coats of OWATROL AP60.
- Heavily Rusted Surfaces: Remove all loose and flaking rust. Apply two coats of OWATROL AP60. Add 5-20% OWATROL OIL depending on the severity of the rust, to the first coat.
- Rusted PaintSurfaces: We recommend applying a coat of neat OWATROL OIL prior to applying the first coat of OWATROL AP60
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84