TEXTROL Gr
Λάδι εμποτισμού για εξωτερική ξυλεία
 Multicoat coverage: 10 to 12 m²/l - Coverage multicoat system: 5 m²/l |
 Application temperature: +5°C to +35°C |
 Drying time: 24 to 48 h |
PROPERTIES
Use on horizontal and vertical surfaces.
Penetrates and protects from within the wood.
Excellent penetration- Textrol should be in the wood not on the surface.
Non-film forming - will not crack, peel or flake.
Protects against moisture and UV damage.
Quick and easy to apply - "wet on wet" application.
Provides mildew resistance.
Easy maintenance - no stripping or sanding.
WHERE TO USE
- Soft or hardwoods: Cedar, Larch, Pine (pressure treated or not), Ash, Oak ...
- Can be applied to both horizontal surfaces (decks, walkways ,...) and vertical surfaces (cladding, shingles, fences...) and other exterior wood structures
- Do not use on new wood - use SEASONITE
- Direct on prepared woods
Application
- Apply an application of TEXTROL and allow to penetrate for 15-30 minutes.
- Apply a second application and allow to penetrate for 15-30 minutes.
- Repeat this procedure until the wood is saturated i.e. will accept no more oil.
- Do not allow TEXTROL to become touch dry or dry between coats (apply "wet on wet").
- Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
- The appearance of TEXTROL gradually lightens over time due to exposure to the sun and UV rays. When the wood has lightened to a light grey colour, it is time for a maintenance application.
- Refer to the packaging for maintenance procedure.
Color available
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84