pack-antislip ES IT

ANTISLIP (antigliss) italien

Protettivo antiscivolo
picto_PDF Technical data sheet picto_faq FAQ
picto_PDF Safety data sheet picto_outrouver Where to find product

 

 

picto_rendement Coverage: 13 m²/l/per coat
picto_temperature Application temperature: +5°C to +30°C
picto_temps Drying: 24h.

PROPERTIES

Durably protects and decorates slippery wooden surfaces.
Prevents greying.
Contains anti-slip micronized polypropylene wax microbeads (particle size: 100 microns).
Easy application.

WHERE TO USE

  • Exterior wood.
  • Directly to prepared wood.
  • Horizontal surfaces.
  • Treated or untreated softwoods, dense and exotic wood.
  • Brushed, planed finish.

Application

  • Don't dilute. Mix the product well before and during use (for 2 to 3 minutes with an appropriate helical mixer).
  • Apply one coat of Antigliss to the prepared surface along the entire length of the board in the direction of the grain.
  • Allow to dry for a minimum of 6 hours (20°C at 65 % RH), then apply a second coat. Total drying time 24 hours. The ambient temperature and the relative humidity can affect the drying time. If spraying, it is always best to smooth the surface immediately to improve product penetration and ensure an even appearance.
  • Surface ready to use:
  • Between 24 hours and 5 days for light traffic.
  • More than 5 days for normal traffic.

our Advice

  • Before starting, test the chosen colour on a small patch (wait until dry).
  • Protect anything that doesn't need treating, including plants.
  • Apply between 5℃ and 30℃. Don't apply in full sunlight or on very hot wood.
  • The wood's humidity mustn't be higher than 18 %. Comply with the standards and building code in force.
  • Don't apply if rain is expected within 24 hours.
  • Always work the entire length of a board or up to a natural break.
  • If applied with a sprayer, smooth with a brush during application.

Color available

picto_phrase_obligatoires The abovementioned instructions are indicative only. Please refer to the technical and safety data sheets for more detailed instructions. 

Related Products

pack-marine-D1-ES-IT-PT

Copie de DEKS OLJE D1

Protettivo ad alta penetrazione per legni tropicali in interni ed esterni
pack-marine-D2-ES-IT-PT

Copie de DEKS OLJE D2

Finitura per legni esotici.
Owatrol_TEXTROL_1L_ES-IT

Copie de TEXTROL

Protettivo ad alta penetrazione per legni trattati in autoclave e non