AQUANETT CN
木材除油剂
 Coverage: 4 m²/l |
 Application temperature: +5°C à +35°C |
 Working time: 5 minutes |
PROPERTIES
Removes teak and other oils from all woods blackened by UV rays.
Gel consistency.
Oils are dissolved in water.
Ready to use.
Easy application.
Does not contain solvent or paraffin.
Biodegradable.
WHERE TO USE
- Apply direct on wood : outdoor furnitures, caillebotis, decks,... except oak, chesnut.
RECOMMENDATIONS BEFORE Application
- Always test a small area first.
- Wear protective gloves - rubber, nitrile.
- Use nylon/synthetic brushes.
- Cover everything you do not wish to coat, including aluminium parts.
- Always neutralise surface with NET-TROL after stripping.
Application
- Apply a thick layer of AQUANETT to surface to be stripped.
- Allow to stand 5 minutes max.
- Scrub surface with stiff nylon brush and rinse with water using the highest pressure source available or use a pressure washer (max. 60 bar).
- Using hot water makes stripping easier.
Recommendations after Application
- After stripping wood, always neutralise with NET-TROL, immediately after rinsing the AQUANETT.
our Advice
- After stripping wood, always neutralise with NET-TROL, immediately after rinsing the AQUANETT.
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84