POLYTROL CN
颜色恢复剂-塑料、油漆、玻璃钢、金属
 Coverage: 18 m²/l |
 Application temperature : +5°C to +35°C |
 Working time before wipe off : 10 to 20mn. |
PROPERTIES
Revives the colour and appearance of tarnished and dulled plastics and fibreglass (GRP) (car bumpers, boat hulls, garden furniture, shutters).
Restores marble, tiles, tombstones, slate, terracotta tiles where the colour and look has faded.
Rejuvinates and restores flat and chalky paint and varnishes dulled by weathering.
Restore the shine and protects chrome or polished metals: aluminum, chrome, brass, bronze.
RECOMMENDATIONS BEFORE Application
- Before implementing POLYTROL, always make sure the surfaces are clean and free of grease, silicone, and always dry.
- If cleaning is necessary, use a solvent on metal or a mixture of water and detergent, preferably on plastic NET-TROL.
- Rinse well and allow to dry at least 12 hours.
- Hide areas that are not treated.
Application
- Before implementing POLYTROL, always make sure the surfaces are clean and free of grease, silicone, and always dry. If cleaning is necessary, use a solvent on metal or a mixture of water and detergent, preferably on plastic NET-TROL. Rinse well and allow to dry at least 12 hours. Hide areas that are not treated.
- Carefully apply a layer of saturated POLYTROL. Beware of runs (for sanding metal surfaces thoroughly with steel wool very fine, well soaked POLYTROL).
- Leave on for 10-20 minutes then remove the excess product by wiping with a clean lint or paper towel.
- Allow at least 24 hours before use.
our Advice
- Treat small areas in stages to avoid an uncontrolled drying POLYTROL.
- Avoid using the POLYTROL® on hot surfaces or direct sunlight.
- Although POLYTROL is not highly flammable soaked rags should not be discarded as such directly to the trash (risk of self ignition) to dry, first, flat and open.
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84