DSP 800 CN
多功能强效脱油剂
 Coverage: 1,25 - 4 m²/l |
 Application temperature: 10°C to +25°C |
PROPERTIES
Multi purpose stripper
Fast acting & powerful
New formula.
Does not contain Dichloromethane.
RECOMMENDATIONS BEFORE Application
- Shake well before use.
- Open the package with care, to avoid sudden release of pressure.
Application
- Apply a thick, uniform layer of DSP 800 with a synthetic brush or spatula.
- Leave 7 to 45 minutes depending on the type and thickness of the coating. Always carry out a preliminary test prior to commencing the job, to determine the contact time necessary for stripping the finish.
- Remove with spatula or stiff nylon brush.
- Rinse with warm water or white spirit.
- After complete drying, sand the surface.
- Wait 6 hours before painting.
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84