pack-textrol-SK

TEXTROL DK ***

Penetrerende træolie til udendørs træ
picto_rendement Multicoat coverage: 10 to 12 m²/l - Coverage multicoat system: 5 m²/l
picto_temperature Application temperature: +5°C to +35°C
picto_temps Drying time: 24 to 48 h

picto_tecoil

PROPERTIES

Use on horizontal and vertical surfaces.
Penetrates and protects from within the wood.
Excellent penetration- Textrol should be in the wood not on the surface.
Non-film forming - will not crack, peel or flake.
Protects against moisture and UV damage.
Quick and easy to apply - "wet on wet" application.
Provides mildew resistance.
Easy maintenance - no stripping or sanding.

WHERE TO USE

  • Soft or hardwoods: Cedar, Larch, Pine (pressure treated or not), Ash, Oak ...
  • Can be applied to both horizontal surfaces (decks, walkways ,...) and vertical surfaces (cladding, shingles, fences...) and other exterior wood structures
  • Do not use on new wood - use SEASONITE
  • Direct on prepared woods

Application

  • Apply an application of TEXTROL and allow to penetrate for 15-30 minutes.
  • Apply a second application and allow to penetrate for 15-30 minutes.
  • Repeat this procedure until the wood is saturated i.e. will accept no more oil.
  • Do not allow TEXTROL to become touch dry or dry between coats (apply "wet on wet").
  • Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
  • The appearance of TEXTROL gradually lightens over time due to exposure to the sun and UV rays. When the wood has lightened to a light grey colour, it is time for a maintenance application.
  • Refer to the packaging for maintenance procedure.

Color available

 

 

 

Related Products

pack-teak-Olje-SK

TEAK-OLJE DK ***

Olje til teaktræ og hårdttræ- indendørs og udendørs
pack-seasonite-SK

SEASONITE DK ***

Beskyttelse for alt helt nyt udendørs træ
pack-net-trol-SK

NET-TROL DK ***

Trærens &Træfrisker