PACK_D1_PL

DEKS OLJE D1 pl

Saturacyjny olej do drewna wewnętrznego i zewnętrnego
picto_rendement Coverage rate for maintenance: 8 to 12 m²/l - Multicoat coverage: 1 to 4 m²/l
picto_temperature Application temperature: +5°C to +35°C
picto_temps Drying: 24 h.Setting up time before use: 3 days

picto_tecoil

PROPERTIES

Can be applied to both horizontal or vertical surfaces.
Saturates and protects all woods - Soft and Hard ; Oily and Dense.
Excellent penetration - non-film forming.
Replaces the natural oils lost from the wood - will not blacken the timber .
Transparent - Enhances the woods natural grain.
Deep penetrating, stabilises the timber - Protects against moisture ingress.
Easy maintenance - no sanding or stripping.
Used alone, gives a silken matt finish or overcoat with DEKS OLJE D2 for a high gloss finish.

WHERE TO USE

  • Hardwoods and Tropical Timber : Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai ...
  • Softwoods : Pine, Spruce, Larch ...
  • Exterior : garden furniture, patios, walkways, boat decks, topsides on boats, portals ...
  • Interior : flooring, paneling, stairs, doors, windows, door frames ...
  • Marine : Can be applied above or below the waterline. Excellent primer for conventional single pack marine coatings.
  • Direct on prepared woods
  • Horizontal - Vertical.

Application

  • Apply a coat of D.1 - Allow to penetrate for 15-30 minutes.
  • Apply a second application. Allow to penetrate for 15-30 minutes.
  • Repeat this procedure until the wood is saturated i.e. will accept no more oil.
  • Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
  • Do not allow D1 to become touch dry or dry between coats (apply "wet on wet").
  • Refer to the packaging for maintenance procedure.

 

 

 

Related Products

d2_pack-GB-DE-GR

DEKS OLJE D2 pl

Lakier nawierchniowy o wysokim połysku - na zewnątrz/wewnątrz
PACK_NETTROL_PL

NET-TROL pl

Środek do czyszczenia i przywracania koloru drewna