Drying: 12 h. (between each layer) - Working time: 3 days
PROPERTIES
Flexible film that does not crack, peel or flake
High gloss finish
Highly transparent varnish - enhances the natural beauty of the wood
Offers long term protection
No sanding between coats
Easy maintenance
Easy repair, no stripping
WHERE TO USE
Exotic hardwoods (Teak, Ipe, Mahogany, Movingui, Bangkirai...) new or weathered
Exterior : garden furnitures, window & door frames, gates,...
Interior: paneling, door, window frames,...
Horizontal & Vertical
Direct on prepared woods
Boats - all applications above waterline
RECOMMENDATIONS BEFORE Application
Wood must first be treated with DEKS OLJE D1, OWATROL OIL, or XYLKOTE (for specific applications)
Wood must be clean, dry and free of all contamination
Do not apply DEKS OLJE D.2 if wet weather expected
DEKS OLJE D.2 is very slippery and is not suitable for use in areas where it will be walked on (i.e. decks) - use DEKS OLJE D.1 only for these areas.
Do not Thin.
Application
Apply 6 coats of DEKS OLJE D.2
Allow minimum 12 hours drying between coats
No sanding between coats
Allow to dry minimum 3-4 days before putting back into service
Note: clean any dripping or spots of Deks Olje D2 from surface before the product dries. Once dry, spots will form and will be very hard to eliminate. It is therefore imperative to eliminate any spots right after the application.