DILUNETT pl
Bezrozpuszczalnikowy środek do usuwania farb - na każdą powierzchnię
 Coverage: 4 m²/l |
 Application temperature: +5°C to +35°C |
 Working time: 5 mn to 12 h. |
PROPERTIES
Does not contain solvent or paraffin - non flammable.
Strips waxes, varnish, paint and most antifouling paint.
Coating becomes soluble with water (rinse with water).
Strips up to 8 coats of paint in 1 application.
Easy to apply, even on the most difficult surfaces to strip i.e. ornate or elaborate.
Does not evaporate - will not dry.
Works alone - does not require supervision or immediate removal of the softened paint.
WHERE TO USE
- Use on wood (Except Oak, Chestnut, Parquet and Veneer), metal (except Aluminum), plastic, stone, cement ...
- Ideal for surfaces difficult to strip or very ornate, horizontal and vertical - doors, gates, barriers ...
- Recommended for stripping large areas - non-flammable, does not dry out, remains active a long time.
- Does not attack plastics, rubber, synthetic coating or gel coats (GRP).
RECOMMENDATIONS BEFORE Application
- Always test a small area first.
- Wear protective gloves - rubber, nitrile. Use nylon/synthetic brushes.
- Working time for stripping the finish varies from minutes to hours depending on the type of finish being removed (oil-based or water-based) and number of coats. Occasionaly check the stripping action, to establish when full removal of the finish(s) can be performed.
- Always neutralise surface with NET-TROL after stripping.
Application
- Apply a thick layer of DILUNETT to surface to be stripped.
- Allow to stand.
- If DILUNETT starts to dry, apply a fine mist of water to keep active.
- Scrub surface with stiff nylon brush and rinse with water using the highest pressure source available or use a pressure washer (max. 60 bar).
- Using hot water makes stripping easier.
- After stripping wood, always neutralise with NET-TROL, immediately after rinsing the DILUNETT.
- Refer to packaging for full instructions.
our Advice
- Using hot water makes stripping easier.
Related Products
SOLID COLOR STAIN pl
Nieprzeźroczysta warstwa do drewna zewnętrznego - na powierzchnie pionowe i pozioe.
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84