E.S.P.de
Malen und Lackieren auf Hochglanzoberflächen
 Coverage: 18 m²/l |
 Application temperature: +5°C to +35°C |
 Recoating time : 2 h. to 7 days |
PROPERTIES
Cleans old painted surfaces and leaves a thin film before recoating.
Allows paints to stick to any smooth non-porous surface.
Avoids sanding.
May be painted over anytime after 2 hours or up to 7 days later.
Easy to use.
Will not damage old coatings.
Reduces surface preparation time.
WHERE TO USE
- Lacquers, baked enamels, varnishes, paint : walls, furniture, radiators...
- Ceramics : bathroom
- Melamine : kitchen furniture
- Glass
RECOMMENDATIONS BEFORE Application
- Ensure new finish is compatible with the old finish.
- Do not overcoat with 2 pack finishes, cellulose, xylene and urethane coatings .
- Remove any loose and flaking old finish.
- For greasy, waxed or varnished surfaces, scrub surface with a green scourer or 00 steel wool soaked with ESP. Wipe off all ESP after 5-10 minutes then follow application instructions below.
- Wipe up ESP before drying. Use clean clothes and change them regularly.
- Do not contaminate new clean ESP with old used ESP.
- Do not use ESP for dipping.
Application
- Apply a liberal application of ESP.
- Leave to stand 5 minutes then lightly wipe over the surface in one direction with a clean cloth to remove excess ESP.
- Allow ESP to dry for 2 hours, before applying the finish.
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84