DEKS OLJE D2 no
Høyglans finisholje for interiør og eksteriør
 Coverage: 15 m²/l |
 Application temperature: +8°C to +35°C |
 Drying: 12 h. (between each layer) - Working time: 3 days |
PROPERTIES
Flexible film that does not crack, peel or flake
High gloss finish
Highly transparent varnish - enhances the natural beauty of the wood
Offers long term protection
No sanding between coats
Easy maintenance
Easy repair, no stripping
WHERE TO USE
- Exotic hardwoods (Teak, Ipe, Mahogany, Movingui, Bangkirai...) new or weathered
- Exterior : garden furnitures, window & door frames, gates,...
- Interior: paneling, door, window frames,...
- Horizontal & Vertical
- Direct on prepared woods
- Boats - all applications above waterline
RECOMMENDATIONS BEFORE Application
- Wood must first be treated with DEKS OLJE D1, OWATROL OIL, or XYLKOTE (for specific applications)
- Wood must be clean, dry and free of all contamination
- Do not apply DEKS OLJE D.2 if wet weather expected
- DEKS OLJE D.2 is very slippery and is not suitable for use in areas where it will be walked on (i.e. decks) - use DEKS OLJE D.1 only for these areas.
- Do not Thin.
Application
- Apply 6 coats of DEKS OLJE D.2
- Allow minimum 12 hours drying between coats
- No sanding between coats
- Allow to dry minimum 3-4 days before putting back into service
- Note: clean any dripping or spots of Deks Olje D2 from surface before the product dries. Once dry, spots will form and will be very hard to eliminate. It is therefore imperative to eliminate any spots right after the application.
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84