pack-D2-SK

DEKS OLJE D2 no

Høyglans finisholje for interiør og eksteriør
picto_rendement Coverage: 15 m²/l
picto_temperature Application temperature: +8°C to +35°C
picto_temps Drying: 12 h. (between each layer)Working time: 3 days

picto_tecoil  picto_A+

PROPERTIES

Flexible film that does not crack, peel or flake
High gloss finish
Highly transparent varnish - enhances the natural beauty of the wood
Offers long term protection
No sanding between coats
Easy maintenance
Easy repair, no stripping

WHERE TO USE

  • Exotic hardwoods (Teak, Ipe, Mahogany, Movingui, Bangkirai...) new or weathered
  • Exterior : garden furnitures, window & door frames, gates,...
  • Interior: paneling, door, window frames,...
  • Horizontal & Vertical
  • Direct on prepared woods
  • Boats - all applications above waterline

RECOMMENDATIONS BEFORE Application

  • Wood must first be treated with DEKS OLJE D1, OWATROL OIL, or XYLKOTE (for specific applications)
  • Wood must be clean, dry and free of all contamination
  • Do not apply DEKS OLJE D.2 if wet weather expected
  • DEKS OLJE D.2 is very slippery and is not suitable for use in areas where it will be walked on (i.e. decks) - use DEKS OLJE D.1 only for these areas.
  • Do not Thin.

Application

  • Apply 6 coats of DEKS OLJE D.2
  • Allow minimum 12 hours drying between coats
  • No sanding between coats
  • Allow to dry minimum 3-4 days before putting back into service
  • Note: clean any dripping or spots of Deks Olje D2 from surface before the product  dries. Once dry, spots will form and will be very hard to eliminate. It is therefore imperative  to eliminate any spots right after the application.

 

 

 

Related Products

pack-D1-SK

DEKS OLJE D1 no

Mettende treolje for tropisk treverk - Interiør og eksteriør
pack-rustol-owatrol-SK

OWATROL OLJE no

Fargeløs, penetrerende og isolerende rustbeskyttende olje
pack-net-trol-SK

MAST RESTORER no

Trerens & Fargefornyer