pack-alu-SK

OWATROL ALUMINIUM no

Aluminiumsmaling for alle overflater
picto_rendement Coverage: 18 m²/l
picto_temperature Application temperature: +5°C to +35°C
picto_temps Drying: 4 to 6 h - Recoating time: 24 to 48 h

picto_tecoil

PROPERTIES

Anti corrosive aluminium finish with intense high gloss look.
High reflecting film - light and heat
Excellent penetrating and adhesion properties due to the binding properties of OWATROL OIL - Does not peel or flake.
Rejuvinates rusted surfaces.
Ideal for aggresive climatic conditions. Withstands chemical attacks.
Easy application.
Protects against corrosion.
Very good film-forming qualities (adhesion, flexibility, even film).
High temperature resistance up to +175 °C.

WHERE TO USE

  • Exterior: grates, fences, structural steelwork, roofing, cisterns, storage tanks, trailers, exhaust, pipes ...
  • Interior: machinery, pumps, electrical, plumbing.
  • Horizontal and vertical surfaces.

RECOMMENDATIONS BEFORE Application

  • Shake or stir paint well before and during use.
  • Surfaces must be clean, dry and free from oil, grease and other surface contaminants.
  • On new metal (except aluminium), always apply an application of OWATROL OIL to avoid any possible reaction between the metal and aluminium paint.
  • Cover everything you do not wish to paint, especially when applying by roller or spray.
  • Do not dilute.

Application

  • Apply a coat of OWATROL RA85. If two coats are required, allow 24 hours between coats.
  • OWATROL RA85 is based on OWATROL OIL, which allows an even shiny film to form while maintaining high flexibility.

Recommendations after Application

  • Return any unused product to it original container. Clean all tools and equipment.
  • Rags soiled with RA85 should be allowed to dry flat or dipped in water before disposing of.

 

 

 

Related Products

pack-rustol-owatrol-SK

OWATROL OLJE no

Fargeløs, penetrerende og isolerende rustbeskyttende olje
pack-CIP-SK

OWATROL C.I.P. no

Rusthemmende grunning for en- og tokomponentmalinger
pack-polytrol-SK

POLYTROL no

Fargefornyer - Plastikk, Maling, GRP, Metall