OWATROL E-B
Mix-In Bonding Primer
 Application temperature: +5°C to +35°C |
 Drying time: 2 to 4 h - Recoating time: 4 h |
PROPERTIES
E-B acts as a stabiliser, penetrating deep into the surface to firmly bond the first coat of paint to the substrate, thus eliminating need for primer.
Ensures an even coverage and maximum adhesion between the first and second coat of paint.
E-B's high solids content maintains the inherent characteristics of the paint, improves hiding power and increases coverage by up to 20%.
No peeling.
Odour free.
Functions
PERCENTAGE OF OWATROL E-B MIXED WITH PAINT, ONLY IN FIRST COAT
- Surfaces that have not been painted :
- Non-porous and stable : 30% EB
- Porous and chalky : 50% EB
- Surfaces that have already been painted :
- Stable : 25% EB
- Stable, previously painted with white wash, silicate or pliolite : 30% EB
- Chalky : 50% EB
- Varnished : 50% EB
- Unstable surfaces or in very bad shape : 50% EB
- Specific surfaces :
- Wood, plastic, glass : 50% EB
- Vinyl coated paper : 25% EB
WHERE TO USE
- Additive for waterbased paint and varnish.
- Can be used on all surfaces, especially suitable for unstable, chalky and powdery surfaces as well as for difficult surfaces such as glass, plastic, wood, varnished surfaces etc.
- Can be used as a primer or mixed with paint.
Application
- Always test for compatibility.
- Make sure the surface is clean and free from grease; remove any flaky paint.
- For the proportions E-B/Paint see table. (For very chalky surfaces E-B can be used alone. Allow to dry for 24-48h.)
- Use E-B in first coat of paint only.
- After application of the E-B/paint mix allow to dry approx 4 hours.
- Apply second coat of paint without E-B.
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84