AAAAAD
Reference : AAAAADen
:
- :
TVA 19.6%19.6%
CONDITION : New and bare
DESIRED FINISH : Waterborne penetrating finish
SUPPORT : Wood
SITUATION : Interior
TYPE : Exotic except iroko, padouk, azobe
EXPLICATIF : Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: Conduct a water drop test: sprinkle a few drops of water on the surface. If water penetrates quickly the finish can be applied. If the water sits on the surface or beads up then the grain of the wood is not sufficienlty open to apply the finish. It is then necessary to prepare it by sanding the wood with (grit 80/100 max) abrasive and thoroughly dust off.
APPLICATION: Apply one coat of OLEOFLOOR NATURAL white or grey. Allow to dry 3-4 hours.In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. OLEOFLOOR NATURAL clear can also be tinted (max. 3%) with a liquid universal colourant. Apply one coat of the mixture. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Another option is to add 10% of PRIMAFLOOR colour in the first coat of OLEOFLOOR NATURAL clear. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Last but not least you can apply one coat of PRIMAFLOOR colour. Allow it to dry 3-4 hours. Apply one coat of OLEOFLOOR NATURAL clear. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a second coat of OLEOFLOOR NATURAL clear.
The surface must be clean, dry and in sound condition.
PREPARATION: Conduct a water drop test: sprinkle a few drops of water on the surface. If water penetrates quickly the finish can be applied. If the water sits on the surface or beads up then the grain of the wood is not sufficienlty open to apply the finish. It is then necessary to prepare it by sanding the wood with (grit 80/100 max) abrasive and thoroughly dust off.
APPLICATION: Apply one coat of OLEOFLOOR NATURAL white or grey. Allow to dry 3-4 hours.In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. OLEOFLOOR NATURAL clear can also be tinted (max. 3%) with a liquid universal colourant. Apply one coat of the mixture. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Another option is to add 10% of PRIMAFLOOR colour in the first coat of OLEOFLOOR NATURAL clear. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Last but not least you can apply one coat of PRIMAFLOOR colour. Allow it to dry 3-4 hours. Apply one coat of OLEOFLOOR NATURAL clear. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a second coat of OLEOFLOOR NATURAL clear.
DESIRED APPEARANCE : Transparent Matt
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84