BAGABG

Reference : BAGABGen
:
  • :
TVA 19.6%19.6%
CONDITION : New and bare
DESIRED FINISH : Stain
SUPPORT : Wood
SITUATION : Exterior
TYPE : Pressure treated wood
EXPLICATIF : Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: Conduct a water drop test: sprinkle a few drops of water on the wood. If water penetrates quickly the finish can be applied. If the water sits on the surface or beads up then the grain of the wood is not sufficienlty open to apply the finish. It is then necessary to prepare it with one of three solutions: 1-Sand the wood with (grit 80/100 max) abrasive. Thoroughly dust off. 2-For direct application, apply AQUANETT to dry wood. Scrub with a synthetic brush, allow it to stand 5min, rinse with fresh water. After rinsing immediately apply NET-TROL to the wet wood. Scrub with a synthetic brush, allow it stand between 10 and 30min, rinse with fresh water. Allow wood to dry 3 good drying days before applying the finish. 3-For a deferred application (except if applying AQUADECKS or TROPITECH ALL IN ONE), apply one coat of SEASONITE to wood that is touch dry. Allow wood to weather between 6 and 12 months. Clean with NET-TROL, rinse with fresh water. Allow wood to dry 3 good drying days before applying finish.
APPLICATION: Apply one coat of SOLID COLOR STAIN, allow to dry 4 hours. Apply second coat. Allow to dry 24 hours without rain.
DESIRED APPEARANCE : Opaque Matt
Ajout au panier