AACGEA
Reference : AACGEAen
:
- :
TVA 19.6%19.6%
CONDITION : Stained or coated with an acrylic finish
DESIRED FINISH : Water repellent finish
SUPPORT : Wood
SITUATION : Interior
TYPE : Softwood except Western Red Cedar
EXPLICATIF : Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of XYLIN, allow it to penetrate 15-30min max. Apply a second coat, allow it penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. 2- Apply one coat of OLEOFLOOR NATURAL clear. Allow it to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. Do not leave more than 12 hours between the 1st and 2nd coat
The surface must be clean, dry and in sound condition.
PREPARATION: Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of XYLIN, allow it to penetrate 15-30min max. Apply a second coat, allow it penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. 2- Apply one coat of OLEOFLOOR NATURAL clear. Allow it to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. Do not leave more than 12 hours between the 1st and 2nd coat
DESIRED APPEARANCE : Clear Matt
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84