AAEAAA

Reference : AAEAAAen
:
  • :
TVA 19.6%19.6%
CONDITION : New and bare
DESIRED FINISH : Waterborne penetrating finish
SUPPORT : Wood
SITUATION : Interior
TYPE : European wood
EXPLICATIF : Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: Conduct a water drop test: sprinkle a few drops of water on the surface. If water penetrates quickly the finish can be applied. If the water sits on the surface or beads up then the grain of the wood is not sufficienlty open to apply the finish. It is then necessary to prepare it by sanding the wood with (grit 80/100 max) abrasive and thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of XYLIN, allow it to penetrate 15-30min max. Apply a second coat, allow it penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. 2- Apply one coat of OLEOFLOOR NATURAL clear. Allow it to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. Do not leave more than 12 hours between the 1st and 2nd coat
DESIRED APPEARANCE : Clear Matt
Ajout au panier