AAEICB
Reference : AAEICBen
:
- :
TVA 19.6%19.6%
CONDITION : Bare but dirty inside
DESIRED FINISH : Floor varnish
SUPPORT : Wood
SITUATION : Interior
TYPE : European wood
EXPLICATIF : Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION:: 2 options available: 1- One component finish : Thoroughly stir VEGAFLOOR and apply an even generous coat. Allow to dry 3-4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat. 2- Two component finish : mix 1 part of UFL hardener to 10 parts of ULTIMAFLOOR. After 5min apply an even generous coat. Allow to dry 4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION:: 2 options available: 1- One component finish : Thoroughly stir VEGAFLOOR and apply an even generous coat. Allow to dry 3-4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat. 2- Two component finish : mix 1 part of UFL hardener to 10 parts of ULTIMAFLOOR. After 5min apply an even generous coat. Allow to dry 4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat
DESIRED APPEARANCE : Clear Satin
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84