BAEAGC
Reference : BAEAGCen
:
- :
TVA 19.6%19.6%
CONDITION : New and bare
DESIRED FINISH : Solvent based saturating oil
SUPPORT : Wood
SITUATION : Exterior
TYPE : European wood
EXPLICATIF : Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: Conduct a water drop test: sprinkle a few drops of water on the surface. If water penetrates quickly the finish can be applied. If the water sits on the surface or beads up then the grain of the wood is not sufficienlty open to apply the finish. It is then necessary to prepare it with one of two solutions: 1-Sand the wood with (grit 80/100 max) abrasive. Thoroughly dust off. 2-For a deferred application (except if applying AQUADECKS or TROPITECH ALL IN ONE), apply one coat of SEASONITE to wood that is touch dry. Allow wood to weather between 6 and 12 months. Clean with NET-TROL, rinse with fresh water. Allow wood to dry 3 good drying days before applying finish.
APPLICATION: Apply one coat of DEKS OLJE D1 or D.1 PRO, allow to penetrate 15-30min max, apply a second coat. Allow it to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain. Apply 6 coats of DEKS OLJE D2 ; allow 12 hours minimum drying between coats.
The surface must be clean, dry and in sound condition.
PREPARATION: Conduct a water drop test: sprinkle a few drops of water on the surface. If water penetrates quickly the finish can be applied. If the water sits on the surface or beads up then the grain of the wood is not sufficienlty open to apply the finish. It is then necessary to prepare it with one of two solutions: 1-Sand the wood with (grit 80/100 max) abrasive. Thoroughly dust off. 2-For a deferred application (except if applying AQUADECKS or TROPITECH ALL IN ONE), apply one coat of SEASONITE to wood that is touch dry. Allow wood to weather between 6 and 12 months. Clean with NET-TROL, rinse with fresh water. Allow wood to dry 3 good drying days before applying finish.
APPLICATION: Apply one coat of DEKS OLJE D1 or D.1 PRO, allow to penetrate 15-30min max, apply a second coat. Allow it to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain. Apply 6 coats of DEKS OLJE D2 ; allow 12 hours minimum drying between coats.
DESIRED APPEARANCE : Clear Gloss
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84