EXPLICATIF : Ensure weather conditions are compatible with application of the product. The surface must be clean, dry and in sound condition. PREPARATION: 2 options available for stripping back to bare wood: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any waxz residue. 2-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off. APPLICATION: Apply one coat of DEKS OLJE D1 or D.1 PRO, allow to penetrate 15-30min max, apply a second coat. Allow it to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain. Apply 6 coats of DEKS OLJE D2 ; allow 12 hours minimum drying between coats.