COMPOXELL
Composite wood finish
 Coverage: 10 to 12 m²/l |
 Application temperature: +10°C to +35°C |
 Drying time (Touch Dry): 1 hour - Recoat: 4 hours - Fully Dry: 12/24 hours |
PROPERTIES
Semi-transparent tinted coating.
Stain resistant barrier (oil, grease, food, etc.).
Waterproofs the surface.
Easily applied.
Quick drying.
Low odour
Functions
- COMPOXELL® is a water-based finish for decorating and restoring composite wood decks, cladding etc.
- Hardwearing, stain resistant and waterproofing the surface, COMPOXELL® protects composite wood from UV damage and the effects of the weather.
WHERE TO USE
- Exterior.
- All composite woods.
- Vertical and horizontal surfaces – Decking, Cladding, Garden furniture….
- Ideal for grooved decking.
SURFACE PREPARATION
- Surfaces must be clean, dry and free of dirt, grease, oil, mildew, stains etc.
- Treat mildew with a 50/50 bleach/water solution. Scrub solution on to surface and allow to stand for 10-15 minutes rinse thoroughly. Allow to dry.
- Clean surface with COMPO-CLEAN* or suitable detergent.
- After cleaning allow wood to thoroughly dry or until it has reached a moisture content of 18% or less before applying the finish.
Application
- Use as is. Do not dilute
- Stir product thoroughly before and periodically during application.
- Apply a single, even coat of COMPOXELL® to the entire length or piece of wood, stopping at any natural breaks to avoid lapping.
- Allow to dry.
- On very old, damaged and porous surfaces apply a 2nd coat.
- Where one coat is sufficient but a greater sheen level and/or greater durability is desired a 2nd coat may be applied.
- After spray application always back-brush or back-roll to improve penetration and uniformity of coverage.
Maintenance
- This will depend on exposure to the sun, weather and foot traffic.
- Maintenance is due when the surface has become dull and faded.
- COMPOXELL® does not require sanding or stripping prior to the application of a maintenance coat.
- Clean surface with COMPO-CLEAN*
- Apply a single even coat of COMPOXELL® to the entire surface according to the “Application” instructions.
Color available
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84