Use on horizontal and vertical surfaces.
Penetrates and protects from within the wood.
Excellent penetration- Textrol should be in the wood not on the surface.
Non-film forming - will not crack, peel or flake.
Protects against moisture and UV damage.
Quick and easy to apply - "wet on wet" application.
Provides mildew resistance.
Easy maintenance - no stripping or sanding.
WHERE TO USE
Soft or hardwoods: Cedar, Larch, Pine (pressure treated or not), Ash, Oak ...
Can be applied to both horizontal surfaces (decks, walkways ,...) and vertical surfaces (cladding, shingles, fences...) and other exterior wood structures
Do not use on new wood - use SEASONITE
Direct on prepared woods
Application
Apply an application of TEXTROL and allow to penetrate for 15-30 minutes.
Apply a second application and allow to penetrate for 15-30 minutes.
Repeat this procedure until the wood is saturated i.e. will accept no more oil.
Do not allow TEXTROL to become touch dry or dry between coats (apply "wet on wet").
Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots.
The appearance of TEXTROL gradually lightens over time due to exposure to the sun and UV rays. When the wood has lightened to a light grey colour, it is time for a maintenance application.