TEAK-OLJE
Oil for teak - Interior and exterior
 Multicoat coverage: 10 to 14 m²/l - Coverage multilayer system: 5 to 7 m²/l |
 Application temperature: +5°C to +35°C |
 Dry to touch: 24 h - Setting up time before use: 48 h |
PROPERTIES
Protects and nourishes the wood.
Manitains and enhances the woods natural beauty.
Natural rich matt finish.
Will not blacken due to UV rays.
WHERE TO USE
- Direct on prepared woods
- Exotic woods : Teak and other woods used for garden furniture except Keruing.
- Exterior.
- Horizontal and vertical.
Application
- Do not dilute.
- Apply 1st application of TEAK-OLJE and allow to penetrate, normally 15-20 minutes.
- Apply 2nd 'wet on wet' application of TEAK OLJE and allow to penetrate 15-20 minutes.
- Wipe up any excess TEAK OLJE with a lint free cloth that has not penetrated after this time.
- Do NOT allow TEAk OLJE to become touch dry or dry between applications.
- NB. : The oiled appearance of TEAK-OLJE gradually lightens over the weeks due to exposure to the sun and UV rays. When the wood has an unoiled appearance it is time for a maintenance application.
Maintenance
- Apply a single application of TEAK OLJE to the substrate with brush, roller or spray.
- TEAK-OLJE does not blacken, peel or flake and therefore requires no sandingor stripping prior to a maintenance application.
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84