pack-XYLKOTE-DE-ES

XYLKOTE Gr

XYLKOTE- Λάδι διαποτισμού για εσωτερική ξυλεία
picto_rendement Coverage: 8 to 12 m²/l
picto_temperature Application temperature: +10°C to +30°C
picto_temps Drying time: 24 hours

picto_tecoil

PROPERTIES

XYLKOTE protects

  • Penetrates the wood and protects it from moisture ingress.
  • Stabilises the bare untreated wood.
  • Minimises movement of the wood - reduces the risk of distortion.
  • Protects against mold and fungi
  • Excellent penetration.

XYLKOTE decorates

  • Accentuates the natural wood grain and colour, especially soft woods (Fir, Pine, Spruce, Larch ,...).
  • Clear matt finish
  • A clear satin finish can be achieved by applying an additional application 24 hours after saturating the wood.
  • Can be tinted with universal colourants (5-10g per litre) or with liquid waxes (US).

XYLKOTE saves time

  • Does not blacken over time.
  • Easy clean - soap and water.
  • Easy maintenance - no sanding or stripping.
  • Can be patch repaired.

WHERE TO USE

  • Direct on prepared woods
  • Floors, worktops, paneling, beams, ...
  • On structures after treatment of a product xylophagous.
  • Furniture: As the finish or primer before waxing.
  • Soft and Hardwoods: Pine, Spruce, Douglas Fir Cedar, Chestnut, Beech, Oak....
  • Llaminated woods

RECOMMENDATIONS BEFORE Application

  • New wood: Abrade with 100 grit paper to open the wood pores, dust off and check it is dry.
  • Wood weathered, stained or blackened: clean timber with a degreaser NET-TROL.
  • Wood stained, varnished or waxed: XYLKOTE may only be applied to bare wood. Strip or sand back to bare wood.

Application

  • Apply a coat of XYLKOTE by brush or roller. Allow to penetrate 15 to 30 minutes.
  • Apply a second coat of XYLKOTE. Allow to penetrate 15 to 30 minutes.
  • Repeat application until wood is saturated (allow 2-3 applications on new wood).
  • Always finish off in the direction of the grain.
  • Do not allow XYLKOTE to become touch dry or dry between coats.
  • Wipe off any excess product that has not penetrated to avoid shiny spots.
  • Allow 24 hours drying before putting item or room into service.
  • Satin finish : 24 hours after saturation is complete, apply a single coat of XYLKOTE, allow to dry.

our Advice

  • For exotic woods (Teak, Merbau, ...) use DEKS OLJE D.1.
  • For further information and advise please contact our woodcare department.

 

 

 

Related Products

primafloor_pack-GB-DE

PRIMAFLOOR Gr

Αστάρι και/ ή χρώμα για ξύλο πριν την τελική αποστρώση
pack-TEAK-OLJE-GB-GR

TEAK-OLJE Gr

Λάδι τικ για ξύλο - Εσωτερικής και εξωτερικής χρήσης
owatrol eb_pack-GB-GR

OWATROL E-B Gr

Συνδετικό αστάρι που αναμιγνύεται με το χρώμα