OWATROL C.I.P. DK ***
Rusthæmmende grunding for en- og tokomponentmalinger
 Coverage: 15 m²/l |
 Application temperature: +5°C to +35°C |
 Drying: 6 h - Recoating time: 72 h (mini) |
PROPERTIES
Universal rust inhibiting primer for all paint types - Will not dissolve or break down when high solvenst paints applied to it.
Penetrates and stabilises the surface, forming a solid stable layer that other coatings can firmly adhere to.
Pigmentation offers increased protection and perfect film-forming qualities.
Easy to use, no need for sanding or sandblasting.
Use on new or rusted surfaces - interior and exterior.
High temperature resistance up to 175°C.
WHERE TO USE
- C.I.P. (Corrosion Inhibiting Primer) is recommended for all severe environmental conditions: marine or tropical climates, corrosive fumes, protection of motor vehicles, construction equipment and ballast tanks of ships as well as every day items i.e. railings, gates....
- The C.I.P. is especially recommended where a high resistant paint or two-pack finish (urethane, epoxy, chlorinated rubber, synthetic,...).is to be applied or necessary.
RECOMMENDATIONS BEFORE Application
- Shake or stir paint well before and during use.
- Do not dilute.
- Remove all loose and flaking rust, mill scale and old paint back to a sound surface using a wire brush or scraper. It is not necessary to remove all firmly adhered rust.
- Surfaces exposed to chemicals (salts, acids, alkalis...) should be washed with water or steam cleaned.
- Severely contaminated surfaces should be cleaned using the appropriate solvent.
- Before application, ensure surface is clean, dry and free from oil, grease and other surface contaminants.
our Advice
- With the C.I.P. sand or shot-blasted surfaces do not require immediate priming; a light rust coating will not affect its performance or the final result.
Related Products
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84