Do not apply in direct sunlight or to hot surfaces.
When applying by spray, adjust nozzle to prevent formation of a mist.
Always test on a small inconspicuous area first.
Use appropriate protective clothing - Gloves, Goggles
Application
Make up diluted solution as dictated by the surface contamination.
Stir or shake solution well to ensure OWACLEAN is well mixed in.
Apply diluted OWACLEAN to surface using brush, sponge, roller or pump sprayer.
Allow to work 10 minutes.
Do not allow solution to dry on the surface while working.
Rinse surface with fresh clean water using a hose, power washer or bucket and sponge (change water regularly). The use of a powerwasher ensures better dirt removal.
After cleaning check surface is clean by spraying on water. If water droplets form surface is not clean. Repeat cleaning process.
Maintenance
Keep from freezing and high temperatures.
our Advice
To check if surface is clean, spray on water. If water beads or forms droplets, surface is not clean and the process should be repeated.