PURA-TROL
Concentrated cleaner
 Coverage: 7 to 10 m²/l |
 Application temperature: +10°C to +25°C |
 Drying time: 24 hours before applying a finish |
PROPERTIES
PURA-TROL is a concentrated, solvent and acid free multi-purpose cleaner.
Functions
- Quick and easy to use.
- Waterbased.
- Non-aggressive - Will not damage the surface.
- Concentrated formula - Highly economical.
- Residue and smear free after rinsing.
- Easy application.
WHERE TO USE
- Exterior use only.
- Horizontal and vertical surfaces.
- Glassfibre, Plastic, Metal, Concrete, Brick...
- Walls, Engines, Facias, Vinyl Cladding, Vehicles, Masts, Handrails...
RECOMMENDATIONS BEFORE Application
Dilutions
- Dirty Surfaces: 1 part PURA-TROL to 20 parts Water.
- Very Dirty Surfaces: 1 part PURA-TROL to 10 parts Water.
- Concentrated formula. Use only the recommended dilutions. Do not use undiluted.
Application
- Make up diluted solution as dictated by the surface contamination.
- Stir or shake solution well to ensure PURA-TROL is well mixed in.
- Apply diluted PURA-TROL to surface using brush, sponge or pump sprayer.
- Allow to work 10 minutes.
- Do not allow solution to dry on the surface while working.
- Rinse surface with fresh clean water using a hose, power washer or bucket and sponge (change water regularly).
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84