COMPO-CLEAN
Cleaner degreaser for composite woods
 Coverage: 5 to 10 m²/l |
 Application temperature: +5°C to +35°C |
 Working time: 5 mn |
PROPERTIES
Waterbased - Environmentally friendly.
Removes surface and ground in dirt.
Fast acting - from 5 minutes depending on the condition of the surface being cleaned.
Gel formula - Does not run. Easy to apply.
Does not contain solvents or paraffin. Will not attack plastic pool liners, stone, glass...
WHERE TO USE
- Exterior use.
- All types of composite wood.
- Vertical and horizontal surfaces.
- Ideal for grooved decking.
RECOMMENDATIONS BEFORE Application
- Always test a small area first.
- Protect all areas not to be cleaned, plants, shrubs etc including and especially aluminum parts.
- Wear suitable protection - gloves (rubber/nitrile), goggles or visor, clothing.
Application
- Apply a thick layer of COMPO-CLEAN to the area to be cleaned. Large areas, should be cleaned in smaller sections.
- Leave the product to work for 5 minutes (longer if necessary depending on the nature of the dirt and contamination).
- Scrub with a stiff nylon or synthetic brush.
- Rinse with plenty of fresh clean water using the highest pressure source available or use a power washer (max 50 bars). If required repeat above procedure - difficult/stubborn staining. Allow surface to dry 2/3 good drying days before applying chosen finish.
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84