D.1 PRO
Saturating wood oil for hardwoods
 Coverage per coat: 8 to 12m²/l - Multicoat coverage: 1 to 4m²/l |
 Application temperature: 5°C to +35°C |
 Drying time: 24 hours - Setting up time before use: 1 to 3 days |
PROPERTIES
Can be used on horizontal or vertical surfaces.
High UV resistance.
Ideal for dense, greasy or difficult to impregnate hardwood.
Long lasting natural finish.
Excellent penetration..
Non film building. Must be in the wood not on the surface.
Interior - Exterior.
Mildew resistant finish.
Easy to use. Easy to maintain (no stripping, no sanding).
Allows local touch up.
WHERE TO USE
- Tropical hardwoods: Ipe, Teak, Bangkirai, Mahogany...
- direct on prepared woods
- Exterior: Decking, Garden Furniture, Fences, Cladding...
- Interior: Floors, Stairs, Door & Window Frames...
- Horizontal & Vertical Surfaces...
SURFACE PREPARATION
- See technical data sheet
Color available
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84