DECK CLEANER
Cleaner & Brightener
 Coverage : 5 to 10 m² per litre. |
 Application temperature : +5°C / +35°C |
 Working time : 10 / 20 mn |
PROPERTIES
Lightens and restores colour to all greyed weathered marine wood without bleaching.
Fast acting, restores greyed weathered marine wood to its natural colour within 20 minutes.
Use on all wood species: Teak, Mahogany, Iroko, Oak, Larch, Pine...
Excellent degreaser for tropical hardwoods prior to applying the chosen finish.
Removes all traces of weathering attributed to mould, mildew, pollution...
Restores lustre to plastic and GRP dulled by weathering and UV rays.
Removes rust stains.
Neutralises surfaces stripped or cleaned with MARINE STRIP* or DEEP CLEANER*.
Safe to use - harmless to plants and shrubs.
Biodegradable - Does not contain solvents or bleach - rinse with water.
WHERE TO USE
- Exterior use only.
- Removal of weathered grey wood fibres from untreated timber - Decks, Handrails...
- Horizontal or Vertical surfaces.
- Previously coated exterior wood surfaces in need of cleaning.
- Plastic and GRP surfaces - Decks, Hull sides...
RECOMMENDATIONS BEFORE Application
- Do not use on aluminium.
Application
CAUTION:
- Surfaces may be slippery when wet. Use caution when walking on wet surfaces during application.
- DECK CLEANER may dull painted surfaces and some metal fixings if left on to long. Rinse off quickly
- or wipe with a wet cloth.
Wood:
- Wet surface with fresh, clean water.
- Apply DECK CLEANER with a synthetic brush or roller (medium or long pile).
- Scrub surface with a stiff nylon / synthetic brush.
- Leave to stand for approx 10-20 minutes. If surface starts to dry, dampen with a mist application
- of water.
- Scrub surface whilst rinsing with water or use a pressure washer (max. 60 bar).
- If required repeat procedure.
- Allow to dry 48 hours or until the wood meets the moisture content required by the chosen finish.
Plastic or GRP:
- Wet surface with fresh clean water.
- Apply DECK CLEANER using a brush.
- Leave to work 10-20 minutes.
- Scrub surface with a soft or medium nylon scrubbing brush.
- Rinse with large amounts of fresh clean water.
Rust stains:
- Wet surface with fresh clean water.
- Apply DECK CLEANER with a stiff nylon scrubbing brush working in to rust stain.
- Leave to work a minimum of 10 minutes or until stain has gone.
- Scrub surface with stiff nylon scrubbing brush.
- Rinse with large amounts of fresh clean water.
our Advice
- Do not use on aluminium.
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84