AAACDB
Reference : AAACDBen
:
- :
TVA 19.6%19.6%
CONDITION : Grey wood
DESIRED FINISH : Oil
SUPPORT : Wood
SITUATION : Interior
TYPE : Exotic except iroko, padouk, azobe
EXPLICATIF : Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of OLEOFLOOR CLASSIC. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. 2- Apply an even, saturating coat of OLEOFLOOR TRADITION. Wait 20min; buff with a biege pad soaked in OLEOFLOOR TRADITION, remove excess. After 20 minutes buff until saturation with a beige pad to reallocate OLEOFLOOR TRADITION. After 16 hours, conduct a final polishing with a white pad FP/406W or an activated fibre monobrush BNN/406.
The surface must be clean, dry and in sound condition.
PREPARATION: Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of OLEOFLOOR CLASSIC. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. 2- Apply an even, saturating coat of OLEOFLOOR TRADITION. Wait 20min; buff with a biege pad soaked in OLEOFLOOR TRADITION, remove excess. After 20 minutes buff until saturation with a beige pad to reallocate OLEOFLOOR TRADITION. After 16 hours, conduct a final polishing with a white pad FP/406W or an activated fibre monobrush BNN/406.
DESIRED APPEARANCE : Clear Satin
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84