BCJFFB
Reference : BCJFFBen
:
- :
TVA 19.6%19.6%
CONDITION : Stained or coated with an oil based finish
DESIRED FINISH : Paint
SUPPORT : Metal
SITUATION : Exterior
TYPE : Non ferrous metal
EXPLICATIF : Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 3 options available for stripping back to bare surface: 1- Apply DILUNETT on dry surface with a synthetic brush, allow it to work 10-30min depending on number of coats to be stripped (conduct test first to establish contact time required to strip the finish), scrub and rinse thoroughly with fresh water. 2- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 3-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of Owatrol Oil and allow to dry 72 hours @ 20çC. Renew application if necessary to obtain a satin finish.
The surface must be clean, dry and in sound condition.
PREPARATION: 3 options available for stripping back to bare surface: 1- Apply DILUNETT on dry surface with a synthetic brush, allow it to work 10-30min depending on number of coats to be stripped (conduct test first to establish contact time required to strip the finish), scrub and rinse thoroughly with fresh water. 2- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 3-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of Owatrol Oil and allow to dry 72 hours @ 20çC. Renew application if necessary to obtain a satin finish.
DESIRED APPEARANCE : Clear Satin
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84