AACADE

Reference : AACADEen
:
  • :
TVA 19.6%19.6%
CONDITION : New and bare
DESIRED FINISH : Oil
SUPPORT : Wood
SITUATION : Interior
TYPE : Softwood except Western Red Cedar
EXPLICATIF : Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: Conduct a water drop test: sprinkle a few drops of water on the surface. If water penetrates quickly the finish can be applied. If the water sits on the surface or beads up then the grain of the wood is not sufficienlty open to apply the finish. It is then necessary to prepare it by sanding the wood with (grit 80/100 max) abrasive and thoroughly dust off.
APPLICATION: 3 options available depending on the desired finish: 1- mix 3% max of a liquid universal colourant and OLEOFLOOR CLASSIC. Apply one coat of the mixture. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR CLASSIC. 2- Add 10% of PRIMAFLOOR colour in the first coat of OLEOFLOOR CLASSIC. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR CLASSIC. 3- Apply one coat of PRIMAFLOOR. Allow to dry 3-4 hours. Apply one coat of OLEOFLOOR CLASSIC. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a second coat of OLEOFLOOR CLASSIC.
DESIRED APPEARANCE : Transparent Satin
Ajout au panier