AAEADB

Reference : AAEADBen
:
  • :
TVA 19.6%19.6%
CONDITION : New and bare
DESIRED FINISH : Oil
SUPPORT : Wood
SITUATION : Interior
TYPE : European wood
EXPLICATIF : Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: Conduct a water drop test: sprinkle a few drops of water on the surface. If water penetrates quickly the finish can be applied. If the water sits on the surface or beads up then the grain of the wood is not sufficienlty open to apply the finish. It is then necessary to prepare it by sanding the wood with (grit 80/100 max) abrasive and thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of OLEOFLOOR CLASSIC. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. 2- Apply an even, saturating coat of OLEOFLOOR TRADITION. Wait 20min; buff with a biege pad soaked in OLEOFLOOR TRADITION, remove excess. After 20 minutes buff until saturation with a beige pad to reallocate OLEOFLOOR TRADITION. After 16 hours, conduct a final polishing with a white pad FP/406W or an activated fibre monobrush BNN/406.
DESIRED APPEARANCE : Clear Satin
Ajout au panier