BADHGD

Reference : BADHGDen
:
  • :
TVA 19.6%19.6%
CONDITION : Stained or coated with a 2K product
DESIRED FINISH : Solvent based saturating oil
SUPPORT : Wood
SITUATION : Exterior
TYPE : Western Red Cedar
EXPLICATIF : Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare wood: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any waxz residue. 2-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of TEXTROL, allow to penetrate 15-30min max, apply a second coat. Allow to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain. 2- Thoroughly stir TEXTROL HES. Apply one coat, allow to penetrate 15-30min max. ; brush out excess product to give a uniform finish and improve penetration. Allow to dry 24 hours without rain.
DESIRED APPEARANCE : Transparent Matt
Ajout au panier