Our solutions
AAAEDA
AAAEDAen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of XYLIN, allow it to penetrate 15-30min max. Apply a second coat, allow it penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. 2- Apply one coat of OLEOFLOOR NATURAL clear. Allow it to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. Do not leave more than 12 hours between the 1st and 2nd coat
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of XYLIN, allow it to penetrate 15-30min max. Apply a second coat, allow it penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. 2- Apply one coat of OLEOFLOOR NATURAL clear. Allow it to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. Do not leave more than 12 hours between the 1st and 2nd coat
AAAEDB
AAAEDBen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of OLEOFLOOR CLASSIC. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. 2- Apply an even, saturating coat of OLEOFLOOR TRADITION. Wait 20min; buff with a biege pad soaked in OLEOFLOOR TRADITION, remove excess. After 20 minutes buff until saturation with a beige pad to reallocate OLEOFLOOR TRADITION. After 16 hours, conduct a final polishing with a white pad FP/406W or an activated fibre monobrush BNN/406.
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of OLEOFLOOR CLASSIC. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. 2- Apply an even, saturating coat of OLEOFLOOR TRADITION. Wait 20min; buff with a biege pad soaked in OLEOFLOOR TRADITION, remove excess. After 20 minutes buff until saturation with a beige pad to reallocate OLEOFLOOR TRADITION. After 16 hours, conduct a final polishing with a white pad FP/406W or an activated fibre monobrush BNN/406.
AAAEDD
AAAEDDen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of OLEOFLOOR NATURAL white or grey. Allow to dry 3-4 hours.In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. OLEOFLOOR NATURAL clear can also be tinted (max. 3%) with a liquid universal colourant. Apply one coat of the mixture. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Another option is to add 10% of PRIMAFLOOR colour in the first coat of OLEOFLOOR NATURAL clear. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Last but not least you can apply one coat of PRIMAFLOOR colour. Allow it to dry 3-4 hours. Apply one coat of OLEOFLOOR NATURAL clear. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a second coat of OLEOFLOOR NATURAL clear.
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of OLEOFLOOR NATURAL white or grey. Allow to dry 3-4 hours.In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. OLEOFLOOR NATURAL clear can also be tinted (max. 3%) with a liquid universal colourant. Apply one coat of the mixture. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Another option is to add 10% of PRIMAFLOOR colour in the first coat of OLEOFLOOR NATURAL clear. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Last but not least you can apply one coat of PRIMAFLOOR colour. Allow it to dry 3-4 hours. Apply one coat of OLEOFLOOR NATURAL clear. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a second coat of OLEOFLOOR NATURAL clear.
AAAEDE
AAAEDEen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 3 options available depending on the desired finish: 1- mix 3% max of a liquid universal colourant and OLEOFLOOR CLASSIC. Apply one coat of the mixture. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR CLASSIC. 2- Add 10% of PRIMAFLOOR colour in the first coat of OLEOFLOOR CLASSIC. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR CLASSIC. 3- Apply one coat of PRIMAFLOOR. Allow to dry 3-4 hours. Apply one coat of OLEOFLOOR CLASSIC. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a second coat of OLEOFLOOR CLASSIC.
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 3 options available depending on the desired finish: 1- mix 3% max of a liquid universal colourant and OLEOFLOOR CLASSIC. Apply one coat of the mixture. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR CLASSIC. 2- Add 10% of PRIMAFLOOR colour in the first coat of OLEOFLOOR CLASSIC. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR CLASSIC. 3- Apply one coat of PRIMAFLOOR. Allow to dry 3-4 hours. Apply one coat of OLEOFLOOR CLASSIC. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a second coat of OLEOFLOOR CLASSIC.
AAAEEA
AAAEEAen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of XYLIN, allow it to penetrate 15-30min max. Apply a second coat, allow it penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. 2- Apply one coat of OLEOFLOOR NATURAL clear. Allow it to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. Do not leave more than 12 hours between the 1st and 2nd coat
The surface must be clean, dry and in sound condition.
PREPARATION: If the former finish is an Owatrol saturating finish, clean thoroughly the wood and apply one coat of the same saturating finish. Wipe off or brush out excess product if necessary. If the former finish is from another brand, sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of XYLIN, allow it to penetrate 15-30min max. Apply a second coat, allow it penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. 2- Apply one coat of OLEOFLOOR NATURAL clear. Allow it to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. Do not leave more than 12 hours between the 1st and 2nd coat
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84