Our solutions
AAAIAA
AAAIAAen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION: 2 options available: 1- Apply one coat of XYLIN, allow it to penetrate 15-30min max. Apply a second coat, allow it penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. 2- Apply one coat of OLEOFLOOR NATURAL clear. Allow it to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. Do not leave more than 12 hours between the 1st and 2nd coat
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION: 2 options available: 1- Apply one coat of XYLIN, allow it to penetrate 15-30min max. Apply a second coat, allow it penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. 2- Apply one coat of OLEOFLOOR NATURAL clear. Allow it to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. Do not leave more than 12 hours between the 1st and 2nd coat
AAAIAD
AAAIADen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION: Apply one coat of OLEOFLOOR NATURAL white or grey. Allow to dry 3-4 hours.In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. OLEOFLOOR NATURAL clear can also be tinted (max. 3%) with a liquid universal colourant. Apply one coat of the mixture. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Another option is to add 10% of PRIMAFLOOR colour in the first coat of OLEOFLOOR NATURAL clear. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Last but not least you can apply one coat of PRIMAFLOOR colour. Allow it to dry 3-4 hours. Apply one coat of OLEOFLOOR NATURAL clear. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a second coat of OLEOFLOOR NATURAL clear.
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION: Apply one coat of OLEOFLOOR NATURAL white or grey. Allow to dry 3-4 hours.In the case of surfaces subject to hard wear, lightly sand surface and apply a second coat. OLEOFLOOR NATURAL clear can also be tinted (max. 3%) with a liquid universal colourant. Apply one coat of the mixture. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Another option is to add 10% of PRIMAFLOOR colour in the first coat of OLEOFLOOR NATURAL clear. Allow to dry 3-4 hours. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a coat of OLEOFLOOR NATURAL clear. Last but not least you can apply one coat of PRIMAFLOOR colour. Allow it to dry 3-4 hours. Apply one coat of OLEOFLOOR NATURAL clear. In the case of surfaces subject to hard wear, lightly sand surface, dust off and apply a second coat of OLEOFLOOR NATURAL clear.
AAAICA
AAAICAen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION:: 2 options available: 1- One component finish : Thoroughly stir VEGAFLOOR and apply an even generous coat. Allow to dry 3-4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat. 2- Two component finish : mix 1 part of UFL hardener to 10 parts of ULTIMAFLOOR. After 5min apply an even generous coat. Allow to dry 4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION:: 2 options available: 1- One component finish : Thoroughly stir VEGAFLOOR and apply an even generous coat. Allow to dry 3-4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat. 2- Two component finish : mix 1 part of UFL hardener to 10 parts of ULTIMAFLOOR. After 5min apply an even generous coat. Allow to dry 4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat
AAAICB
AAAICBen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION:: 2 options available: 1- One component finish : Thoroughly stir VEGAFLOOR and apply an even generous coat. Allow to dry 3-4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat. 2- Two component finish : mix 1 part of UFL hardener to 10 parts of ULTIMAFLOOR. After 5min apply an even generous coat. Allow to dry 4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION:: 2 options available: 1- One component finish : Thoroughly stir VEGAFLOOR and apply an even generous coat. Allow to dry 3-4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat. 2- Two component finish : mix 1 part of UFL hardener to 10 parts of ULTIMAFLOOR. After 5min apply an even generous coat. Allow to dry 4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat
AAAICC
AAAICCen
Ensure the room is well ventilated during and after application.
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION:: Thoroughly stir VEGAFLOOR and apply an even generous coat. Allow to dry 3-4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat
The surface must be clean, dry and in sound condition.
PREPARATION: For light or everyday dirt, vacuum surface; clean with diluted SOAPCLEAN applied with a floor cloth or wrung out floor mop; allow to dry. If the dirt is heavy, vacuum surface; spray on SPACENETT, and allow it to work 2-3min, clean using a flat microfibre floor mop. Rinse with fresh clean water, changing several times, using a mop or floor cloth. Allow floor completely dry before applying the finish.
APPLICATION:: Thoroughly stir VEGAFLOOR and apply an even generous coat. Allow to dry 3-4 hours. Lightly sand the surface and dust off. Apply second coat. Do not leave more than 12 hours between the 1st and 2nd coat
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84