Our solutions
BBHAEA
BBHAEAen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: If the surface is dirty, clean with Compoclean. Allow to dry thoroughly.
APPLICATION: Apply a generous and even application coat of H4 WOOD. Allow to dry 24 hours.
The surface must be clean, dry and in sound condition.
PREPARATION: If the surface is dirty, clean with Compoclean. Allow to dry thoroughly.
APPLICATION: Apply a generous and even application coat of H4 WOOD. Allow to dry 24 hours.
BBHAFE
BBHAFEen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: If the surface is dirty, clean with Compoclean. Allow to dry thoroughly.
APPLICATION: Apply an even coat of COMPOCARE. Allow to dry 12-24 hours before using.
The surface must be clean, dry and in sound condition.
PREPARATION: If the surface is dirty, clean with Compoclean. Allow to dry thoroughly.
APPLICATION: Apply an even coat of COMPOCARE. Allow to dry 12-24 hours before using.
BBHBEA
BBHBEAen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: Contact us for advice on surface preparation
APPLICATION: Apply a generous and even application coat of H4 WOOD. Allow to dry 24 hours.
The surface must be clean, dry and in sound condition.
PREPARATION: Contact us for advice on surface preparation
APPLICATION: Apply a generous and even application coat of H4 WOOD. Allow to dry 24 hours.
BBHFEA
BBHFEAen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: Apply AQUANETT to dry wood. Scrub with a synthetic brush, allow it to stand 5min, rinse with fresh water. After rinsing immediately apply NET-TROL to the wet wood. Scrub with a synthetic brush, allow it to stand between 10 and 30min, rinse with fresh water. Allow wood to dry, 3 good drying days before applying finish.
APPLICATION: Apply a generous and even application coat of H4 WOOD. Allow to dry 24 hours.
The surface must be clean, dry and in sound condition.
PREPARATION: Apply AQUANETT to dry wood. Scrub with a synthetic brush, allow it to stand 5min, rinse with fresh water. After rinsing immediately apply NET-TROL to the wet wood. Scrub with a synthetic brush, allow it to stand between 10 and 30min, rinse with fresh water. Allow wood to dry, 3 good drying days before applying finish.
APPLICATION: Apply a generous and even application coat of H4 WOOD. Allow to dry 24 hours.
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84