Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare surface: 1- Apply
DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 2- Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Thoroughly stir
TEXTROL NACRE and apply one coat. Allow to dry 3-4 hours, Apply second coat. Do not allow more than 36 hours between coats. Allow to dry 24 hours.