Our solutions
BAEGFG
BAEGFGen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare surface: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 2- Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of SOLID COLOR STAIN, allow to dry 4 hours. Apply second coat. Allow to dry 24 hours without rain.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare surface: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 2- Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of SOLID COLOR STAIN, allow to dry 4 hours. Apply second coat. Allow to dry 24 hours without rain.
BAEGGA
BAEGGAen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare surface: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 2- Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of TEXTROL, allow to penetrate 15-30min max, apply a second coat. Allow to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare surface: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 2- Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of TEXTROL, allow to penetrate 15-30min max, apply a second coat. Allow to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain.
BAEGGC
BAEGGCen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare surface: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 2- Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of DEKS OLJE D1 or D.1 PRO, allow to penetrate 15-30min max, apply a second coat. Allow it to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain. Apply 6 coats of DEKS OLJE D2 ; allow 12 hours minimum drying between coats.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare surface: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 2- Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of DEKS OLJE D1 or D.1 PRO, allow to penetrate 15-30min max, apply a second coat. Allow it to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain. Apply 6 coats of DEKS OLJE D2 ; allow 12 hours minimum drying between coats.
BAEGGD
BAEGGDen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare surface: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 2- Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of TEXTROL, allow to penetrate 15-30min max, apply a second coat. Allow to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain. 2- Thoroughly stir TEXTROL HES. Apply one coat, allow to penetrate 15-30min max. ; brush out excess product to give a uniform finish and improve penetration. Allow to dry 24 hours without rain.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare surface: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 2- Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: 2 options available: 1- Apply one coat of TEXTROL, allow to penetrate 15-30min max, apply a second coat. Allow to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain. 2- Thoroughly stir TEXTROL HES. Apply one coat, allow to penetrate 15-30min max. ; brush out excess product to give a uniform finish and improve penetration. Allow to dry 24 hours without rain.
BAEHAA
BAEHAAen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare wood: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any waxz residue. 2-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of AQUATROL clear, allow it to penetrate 15-30min max, apply second coat. Allow it to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare wood: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any waxz residue. 2-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of AQUATROL clear, allow it to penetrate 15-30min max, apply second coat. Allow it to penetrate. Wipe off or brush out excess product to avoid it drying as a shiny finish on the surface. Allow to dry 24 hours without rain.
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84