Our solutions


BCJHFB

BCJHFBen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare wood: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any waxz residue. 2-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of Owatrol Oil and allow to dry 72 hours @ 20çC. Renew application if necessary to obtain a satin finish.

BCJHFC

BCJHFCen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare wood: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any waxz residue. 2-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of Owatrol Oil and allow to dry 72 hours @ 20çC. Apply 1 to 6 coats of DEKS OLJE D2 depending on the finish and depth of gloss desired. Allow 12 hours minimum drying time between each coat.

BCJHFH

BCJHFHen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare wood: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any waxz residue. 2-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Do not thin. Apply one coat of Owatrol Deco. Allow to dry 8 hours, apply second coat. Allow to dry 24 hours.

BCJHFL

BCJHFLen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 2 options available for stripping back to bare wood: 1- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any waxz residue. 2-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: OWATROL RA.85 (Owatrol Aluminium)

BCJJFB

BCJJFBen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: Remove loose and flaking material. Clean surface. After drying, apply one coat of Owatrol Oil. Allow to dry 72 hours minimum @ 20çC before applying finish.
APPLICATION: Apply one coat of Owatrol Oil and allow to dry 72 hours @ 20çC. Renew application if necessary to obtain a satin finish.

 << < 199 200 201 202 203 204 205 206 207 208 209 > >>