Our solutions
BCJBFH
BCJBFHen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: Contact us for advice on surface preparation
APPLICATION: Do not thin. Apply one coat of Owatrol Deco. Allow to dry 8 hours, apply second coat. Allow to dry 24 hours.
The surface must be clean, dry and in sound condition.
PREPARATION: Contact us for advice on surface preparation
APPLICATION: Do not thin. Apply one coat of Owatrol Deco. Allow to dry 8 hours, apply second coat. Allow to dry 24 hours.
BCJBFL
BCJBFLen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: Contact us for advice on surface preparation
APPLICATION: OWATROL RA.85 (Owatrol Aluminium)
The surface must be clean, dry and in sound condition.
PREPARATION: Contact us for advice on surface preparation
APPLICATION: OWATROL RA.85 (Owatrol Aluminium)
BCJFFB
BCJFFBen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 3 options available for stripping back to bare surface: 1- Apply DILUNETT on dry surface with a synthetic brush, allow it to work 10-30min depending on number of coats to be stripped (conduct test first to establish contact time required to strip the finish), scrub and rinse thoroughly with fresh water. 2- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 3-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of Owatrol Oil and allow to dry 72 hours @ 20çC. Renew application if necessary to obtain a satin finish.
The surface must be clean, dry and in sound condition.
PREPARATION: 3 options available for stripping back to bare surface: 1- Apply DILUNETT on dry surface with a synthetic brush, allow it to work 10-30min depending on number of coats to be stripped (conduct test first to establish contact time required to strip the finish), scrub and rinse thoroughly with fresh water. 2- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 3-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of Owatrol Oil and allow to dry 72 hours @ 20çC. Renew application if necessary to obtain a satin finish.
BCJFFC
BCJFFCen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 3 options available for stripping back to bare surface: 1- Apply DILUNETT on dry surface with a synthetic brush, allow it to work 10-30min depending on number of coats to be stripped (conduct test first to establish contact time required to strip the finish), scrub and rinse thoroughly with fresh water. 2- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 3-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of Owatrol Oil and allow to dry 72 hours @ 20çC. Apply 1 to 6 coats of DEKS OLJE D2 depending on the finish and depth of gloss desired. Allow 12 hours minimum drying time between each coat.
The surface must be clean, dry and in sound condition.
PREPARATION: 3 options available for stripping back to bare surface: 1- Apply DILUNETT on dry surface with a synthetic brush, allow it to work 10-30min depending on number of coats to be stripped (conduct test first to establish contact time required to strip the finish), scrub and rinse thoroughly with fresh water. 2- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 3-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Apply one coat of Owatrol Oil and allow to dry 72 hours @ 20çC. Apply 1 to 6 coats of DEKS OLJE D2 depending on the finish and depth of gloss desired. Allow 12 hours minimum drying time between each coat.
BCJFFH
BCJFFHen
Ensure weather conditions are compatible with application of the product.
The surface must be clean, dry and in sound condition.
PREPARATION: 3 options available for stripping back to bare surface: 1- Apply DILUNETT on dry surface with a synthetic brush, allow it to work 10-30min depending on number of coats to be stripped (conduct test first to establish contact time required to strip the finish), scrub and rinse thoroughly with fresh water. 2- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 3-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Do not thin. Apply one coat of Owatrol Deco. Allow to dry 8 hours, apply second coat. Allow to dry 24 hours.
The surface must be clean, dry and in sound condition.
PREPARATION: 3 options available for stripping back to bare surface: 1- Apply DILUNETT on dry surface with a synthetic brush, allow it to work 10-30min depending on number of coats to be stripped (conduct test first to establish contact time required to strip the finish), scrub and rinse thoroughly with fresh water. 2- Apply DSP 800. Allow it to work according to test previously conducted to strip finish. When the coating curls or softens, remove finish with a scraper or a nylon scrubbing brush. Rinse the surface with warm water, acetone or white spirit to remove any wax residue. 3-Sand the surface. Finish by sanding with 80/100 grit max. Thoroughly dust off.
APPLICATION: Do not thin. Apply one coat of Owatrol Deco. Allow to dry 8 hours, apply second coat. Allow to dry 24 hours.
Proud Members of International Thermo Wood Association 
- Site created by adfields.solutions
© OWATROL - Groupe DURIEU - 29 avenue du Roule - 92200 Neuilly s/Seine (France) - Phone: +33 (0)1 82 88 83 65 - Fax : +33 (0) 160 86 84 84